EPICON 8
Floorstanding three-and-a-half-way loudspeaker from DALI's discontinued EPICON series, with two 8-inch woofers, a 6½-inch mid driver and a hybrid soft-dome/planar tweeter. Aimed at hi-fi listeners with larger rooms and capable amplification.
- 3 + ½-way floorstanding loudspeaker
- 2 x 8 in woofers plus 1 x 6½ in mid driver
- Hybrid tweeter: 29 mm soft dome and planar
- Soft Magnetic Composite (SMC) magnet system
- Frequency range 35 Hz to 30 kHz (±3 dB)
- Sensitivity 89 dB, nominal impedance 5 ohms
Photos
5Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un EPICON 8, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The EPICON 8 is the top floorstander of DALI's EPICON line. It uses a 3 + ½-way design with two 8-inch low/mid drivers and a 6½-inch driver, covering 35 Hz to 30 kHz (±3 dB). Crossover points are set at 550 Hz, 3,100 Hz and 15,000 Hz, and nominal impedance is 5 ohms with a sensitivity of 89 dB.
The magnet systems use Soft Magnetic Composite (SMC), a material with high magnetic conductivity and low electrical conductivity, intended to reduce distortion from losses in the motor. The woofers have wood-fibre cones made at DALI's facility in Denmark. High frequencies come from a hybrid module that pairs a 29 mm soft dome with a 10 x 55 mm planar tweeter, which is meant to give wide, even dispersion.
The cabinet is a six-layer MDF laminate with rounded shapes and no parallel surfaces, with separate internal chambers for each woofer and bass ports behind the bass and midrange drivers. The finish is real-wood veneer with 10 layers of hand-polished lacquer; the listed finish is Satin Black. Connection is through standard loudspeaker terminals from a separate amplifier recommended at 50 to 500 watts.
Vidéo
Spécifications
- Marque
- DALI
- Modèle
- EPICON 8
- Catégorie
- Hi-Fi et audio maison › Enceintes
Audio
- Sensitivity (2.83 V/1 m)
- 89 dB
- Maximum SPL (@ 1 m)
- 112 dB
- Frequency range (±3 dB)
- 35 - 30,000 Hz
- Nominal impedance
- 5 ohms
- Crossover principle
- 3 + ½-way
- Crossover frequencies
- 550 / 3,100 / 15,000 Hz
Drivers
- Low/mid frequency drivers
- 2 x 8 inch / 1 x 6½ inch
- High frequency drivers
- 1 x 29 mm soft dome, 1 x 10 x 55 mm planar
- Woofer cone
- Wood fibre
- Magnet system
- Soft Magnetic Composite (SMC)
Power
- Recommended amplifier power
- 50 - 500 W
Physical
- Cabinet construction
- 6-layer MDF laminate
- Cabinet finish
- Real-wood veneer, 10 layers of hand-polished lacquer
- Available finish
- Black (Satin)
- Port design
- Bass ports behind bass and midrange drivers
- Product status
- Discontinued