Ecler GLOBE5PD
Self-powered 2-way pendant sphere loudspeaker with a 5" woofer and 1" silk dome tweeter, 360° horizontal dispersion and a built-in WiSpeak wireless receiver. Aimed at retail, hospitality, education and corporate installations that hang speakers from the ceiling.
- 5" woofer + 1" silk dome tweeter, 2-way
- 32 W RMS / 128 W peak, self-powered
- Max SPL 106 dB continuous / 112 dB peak
- 360° x 160° (HxV) dispersion
- WiSpeak wireless mono input, 12 m range, <6 ms latency
Photos
8Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un Ecler GLOBE5PD, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The GLOBE5PD is a self-powered sphere loudspeaker from the Ecler WiSpeak range. It combines a 5" woofer with a 1" silk dome tweeter in a fibreglass-reinforced ABS enclosure and spreads sound 360° horizontally and 160° vertically. It is the pendant version of the GLOBE; a separate version exists for light-rail mounting.
Audio arrives wirelessly as one mono channel from the WiSpeak transmitter it is paired with, using 24-bit uncompressed audio at 48 kHz in the 5 GHz band, with latency under 6 ms and range up to 12 m in open space. Volume and tone are set in the WiSpeak grip app, and the filter and EQ settings let it act as bass reinforcement for other WiSpeak loudspeakers. The front panel has an UNPAIR button and WiS and STR LED indicators.
Power comes from an internal universal supply (100–240 VAC, 50–60 Hz) through a 3-pole Euroblock connector. The speaker hangs on two 5 m steel cords supplied in the box, and it comes in white (RAL 9003) or black (RAL 9005).
Spécifications
- Marque
- Ecler
- Modèle
- GLOBE5PD
- Catégorie
- Sonorisation live › Enceintes PA
Audio
- Ways
- 2-ways full range
- Low frequency driver
- 5" woofer
- High frequency driver
- 1" Silk Dome Tweeter
- Effective frequency range
- 70 Hz – 20 kHz (-10dB)
- Sensitivity
- 91 dB (1W/1m)
- Maximum SPL
- 106 dB Continuous / 112 dB Peak
- Crossover filter
- 4.2KHz
- Nominal impedance
- 8Ω
- Power
- 32W RMS / 128W peak
- THD + Noise
- <0,15%
- Signal to noise ratio
- >95dB
- Dispersion (HxV)
- 360° x 160°
- Coverage angle
- 111º (conical)
Wireless (WiSpeak)
- Frequency band
- 5.18~5.32GHz, 5.55~5.825GHz
- RF channels
- Up to 24 non-overlapping, DFS support
- Coverage range
- Up to 12m from a TX to any paired RX, direct line of sight
- Audio channels
- 1 mono audio ch
- Audio transmission
- 24bit uncompressed, 48kHz SR
- Latency
- <6ms
- Pairing time
- Up to 120s
Power
- Power supply
- Internal. Universal, regulated switch mode with PFC
- AC mains requirement
- 100-240 VAC @ 50-60Hz
- AC mains connector
- 3C Euroblock connector
Control
- Volume and tone control
- via WiSpeak grip app
- Front panel
- UNPAIR button, WiS and STR LEDs
Physical
- Enclosure material
- ABS reinforced with fiberglass
- Mounting system
- Steel wire hanging 5 mts
- Finished colour
- White (RAL 9003) or black (RAL 9005)
- Dimensions (ØxD)
- 287x331mm / 11.3"x 13"
- Weight
- 2.2 kg / 4.85 lb
- Environmental rating
- IP10
- Operating temperature
- 0°C to 35°C / 32°F to 95°F
- Certifications
- FCC, EMC, CB
In the box
- Included accessories
- 2 x Steel Wire for hanging 5 mts, 2x plastic cable tie, 1 x eurobloc 3C connector