Ecler IC8i
The IC8i is an 8-inch, two-way ceiling loudspeaker rated at 60 W RMS, with an 8" polypropylene woofer and a 1" dome tweeter. It has a built-in transformer for 70/100 V lines or low-impedance use, and suits installed sound in retail, hospitality, education and similar venues.
- 8" woofer + 1" dome tweeter, two-way
- 60 W RMS / 240 W peak
- Built-in 70/100 V transformer, 8 Ω low-Z mode
- 94 dB sensitivity, 152° conical coverage
- Black or white finish, magnetic frameless grille
Photos
7Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un Ecler IC8i, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The IC8i is a two-way in-ceiling or in-wall loudspeaker with an ABS enclosure, an 8" polypropylene woofer and a 1" dome tweeter. The woofer material is described as resistant to heat and humidity. It handles 60 W RMS and 240 W peak, with 94 dB sensitivity and a 152° conical coverage angle.
A built-in audio transformer lets it run on 70 V or 100 V distribution lines, with multi-tap power settings, or in low-impedance mode at 8 Ω. A selector switches between the low- and high-impedance taps. The front grille is held by magnets and has no frame. It can be removed for painting, and the Ecler logo can also be removed.
Wiring goes to clip-type input terminals. Mounting uses a support system with three rotating tabs, and a cutting template is included. The speaker comes in black (RAL 9005) or white (RAL 9003). EASE files are available, and an optional IC-TB8 accessory is listed.
Spécifications
- Marque
- Ecler
- Modèle
- IC8i
- Catégorie
- Sonorisation live › Enceintes PA
Audio
- Effective frequency range
- 65Hz-20kHz (-10dB)
- Coverage angle / dispersion
- 152° conical
- Power handling
- 60W RMS / 240W Peak
- Sensitivity
- 94dB (1W/1m)
- Maximum SPL
- 112dB continuous / 118dB peak
- Recommended amplifier power
- 120W RMS
- Nominal impedance
- 8Ω
Transducers
- Ways
- 2-ways full range
- Low frequency driver
- 8" Woofer
- High frequency driver
- 1" Dome Tweeter
Power
- Power options 100V (Hi Z multi-tap)
- 5 / 7.5 / 15 / 30W
- Power options 70V (Hi Z multi-tap)
- 2.5 / 3.75 / 7.5 / 15W
Connectivity
- Connection type
- Clip-Type input terminals
Physical
- Installation options
- In-ceiling / In-wall
- Enclosure material
- ABS plastic
- Grille material
- Iron
- Grille fixing system
- Magnets
- Mounting system
- 3 rotating tabs
- Finished colour
- White (RAL 9003) / Black (RAL 9005)
- External diameter
- 254 mm / 10 in.
- Recommended cut out diameter
- 222 mm / 8.74 in.
- Required depth
- >94 mm / >3.70 in.
- Dimensions (WxHxD)
- 254 x 254 x 93 mm. / 10 x 10 x 3.66 in.
- Weight
- 2.35 Kg / 5.18 lb
- Operating temperature
- Min: -20°C ; -4°F / Max: 70°C ; 158°F
- Operating humidity
- <85% HR
- Pieces per box
- 2
- Shipping weight
- 4.75 kg / 10.47 lb
- Included accessories
- Cutting template