Ecler MIMO7272DN
72x72 digital audio matrix for fixed installations, combining 8 analogue mic/line inputs and 8 line outputs with 64 Dante/AES67 channels each way and a 64x64 internal matrix. Suited to multi-zone retail, hospitality, education and corporate systems.
- 72x72 ports: 8 analogue + 64 Dante/AES67 in and out
- Native 64x64 internal digital matrix
- Dual Dante interfaces for redundant networks
- 8 GPI and 8 GPO, RS-232 serial port
- 1RU 19" rack, 3.25 kg
Photos
7Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un Ecler MIMO7272DN, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The MIMO7272DN routes audio between 8 analogue inputs, 8 analogue outputs and 64 Dante/AES67 channels in each direction, through a native internal matrix of 64x64 simultaneous channels. It runs the standard firmware only; no conference firmware is offered. Audio over IP removes cable-length limits by carrying signals across a local Ethernet network.
The analogue inputs are mic/line with software-switched phantom power, and the outputs are line level. Two monitor outputs and a 1/4" headphone jack are also provided. Eight GPI and eight GPO ports handle external control signals. The unit can run EclerNet projects embedded in its processor and act as a server for User Control Panels (UCP) in an EclerNet network.
Two Dante interfaces (primary and secondary) allow redundant Dante networks. A separate Ethernet port serves programming and control, and an RS-232 port supports TP-NET. WPNET wall panels, the PAGENETDN paging station and the WP22DN Dante/AES67 wall interface connect directly over Ethernet, and PoE DC supply is supported. The unit is a 1RU, 19" rack device configured with EclerNet Manager software.
Spécifications
- Marque
- Ecler
- Modèle
- MIMO7272DN
- Catégorie
- Studio › Préamplis et outboard
Inputs
- Analogue inputs
- 8, Mic/Line
- Analogue input connection
- Terminal block (symmetrical)
- Input sensitivity
- -50dBV to +10dBV in 0.5dB steps
- Input impedance
- Balanced, >4kΩ
- Max input level
- +27dBV = +30dBu
- Phantom power
- +42VDC, 5mA max. software switched
Outputs
- Analogue outputs
- 8 Line
- Analogue output connection
- Terminal block (symmetrical)
- Max output level
- +18dBV = +21dBu
- Monitor outputs
- 2, terminal block (symmetrical)
- Headphones
- Jack 1/4 (>200mW/200Ω)
Audio
- Sampling rate
- 48 kHz
- Resolution
- 24 bit
- Latency
- <4.3 ms
- Frequency response
- 5Hz to 24kHz (-3dB)
- Dynamic range
- AD: 110dB, DA: 115dB
- THD+Noise (line, 0dBV)
- <0.004%
- Internal matrix
- 64x64
Connectivity
- Audio over IP
- Dante (Brooklyn)/AES67 (32/32 flows)
- Dante/AES67 channels
- 64 in / 64 out
- Dante interfaces
- 2 x RJ45 (Primary / Secondary)
- Ethernet
- Base-Tx 10/100Mb, 1GB Auto X-Over CAT5e or better
- Serial port
- RS-232, DB9 connector
- GPI
- 8, 0 to 12VDC or TTL level
- GPO
- 8, 3 poles isolated relay; 1A, 48VDC max.
Power
- Power supply
- PoE DC supply
- AC mains requirement
- 90-264VCA 47-63Hz
- Power consumption
- 30VA
- Secondary power supply
- +12VDC, 1.2A max.
Physical
- Dimensions (WxHxD)
- 482.6 x 44 x 253 mm / 19 x 1.73 x 9.96 in.
- Weight
- 3.25 kg / 7.17 lb
- Installation
- 19" rack format (1RU)
- Operating temperature
- -10°C to 40°C / 14°F to 104°F
Software
- Control software
- EclerNet Manager from v6.00