F1-12
The F1-12 is a two-way floorstanding loudspeaker and the top model in Fyne Audio's F1 Series, built around a 300mm (12") IsoFlare point-source driver and a BassTrax-equipped aluminium plinth. It suits high-end Hi-Fi listeners with powerful amplification and room for a 72kg speaker.
- 2-way floorstander with 300mm IsoFlare point-source driver
- 75mm titanium dome compression tweeter
- BassTrax diffuser in 20kg aluminium plinth
- 96dB sensitivity, 8 ohm, 175W RMS handling
- Bi-wired crossover at 750Hz, cryogenically treated
- Piano Gloss Walnut finish, 72kg each
Photos
6Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un F1-12, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The F1-12 is a two-way floorstanding speaker sold as a pair. Its twin-cavity cabinet sits on a machined aluminium plinth weighing 20kg, which houses the BassTrax low-frequency diffuser and a downwards-firing port. The cabinet is hand built and hand finished in the UK in walnut veneer with a burr walnut inlay.
The drive unit is the largest IsoFlare driver in the range: a 300mm multi-fibre bass/midrange cone with a 75mm titanium dome compression tweeter mounted at its centre, forming a time-aligned point source with a neodymium magnet system. The crossover point is 750Hz, and the passive crossover is bi-wired, low loss and deep cryogenically treated.
Two adjustments are provided: high-frequency energy (750Hz to 26kHz) and presence (2.5kHz to 5.0kHz), each over a range of plus or minus 3dB. Sensitivity is 96dB with an 8 ohm nominal impedance, and the speaker accepts amplifiers from 20 to 350 watts RMS. The F1-12 is listed as discontinued and comes in a Piano Gloss Walnut finish.
Vidéo
Spécifications
- Marque
- Fyne Audio
- Modèle
- F1-12
- Catégorie
- Hi-Fi et audio maison › Enceintes
Audio
- System type
- 2 way, downwards firing port, with BassTrax Tractrix diffuser
- Sensitivity (2.83 Volt @ 1m)
- 96dB
- Nominal impedance
- 8 Ohm
- Frequency response (-6dB typical in room)
- 26Hz - 26kHz
- Crossover frequency
- 750Hz
- Crossover type
- Bi-wired passive low loss, 2nd order low pass, 2nd order high pass, Deep Cryogenically Treated
- System adjustments
- High frequency energy (750Hz - 26kHz) +/-3dB; Presence (2.5kHz - 5.0kHz) +/- 3dB
Drivers
- Drive unit complement
- 1 x 300mm IsoFlare point source driver, multi-fibre bass / midrange cone, with 75mm titanium dome compression tweeter, neodymium magnet system
Power
- Recommended amplifier power (Watt RMS)
- 20 - 350
- Continuous power handling (Watt RMS)
- 175
Connectivity
- Wiring
- Bi-wired
Physical
- Dimensions - HxWxD
- 1350 x 450 x 680mm (53.2" x 17.7 x 28.6")
- Net weight - each
- 72kg
- Plinth
- 20kg machined aluminium
- Finishes
- Piano Gloss Walnut
- Sold as
- Per pair
- SKU
- F8000001