F1-12S
Flagship two-way floorstanding loudspeaker from Fyne Audio, sold as a pair, built around a 300mm (12") IsoFlare point-source driver with a 75mm titanium dome compression tweeter. Aimed at high-end Hi-Fi listeners with powerful amplification and large rooms.
- 2-way floorstander sold as a pair
- 300mm IsoFlare driver with 75mm titanium dome tweeter
- BassTrax Tractrix diffuser in a 20kg aluminium plinth
- Sensitivity 96dB, 8 ohm nominal impedance
- Frequency response 24Hz - 26kHz (-6dB, in room)
- Adjustable HF energy and presence, +/-3dB
Photos
7Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un F1-12S, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The F1-12S is an update of the earlier F1-12 and sits at the top of Fyne Audio's range. It is a two-way design with a single 300mm IsoFlare point-source driver that has a FyneFlute surround and a multi-fibre bass/midrange cone. A 75mm titanium dome compression tweeter is mounted at its centre, and the maker states the response is time aligned up to over 26kHz. The crossover has been redesigned and the driver refined in this version for improved low-frequency output.
The twin-cavity cabinet stands on a 20kg machined aluminium plinth. The plinth houses the BassTrax Tractrix LF diffuser, which works with a downward-firing port. The crossover is a bi-wired, passive, low-loss design with 2nd-order low-pass and high-pass sections, and it is deep cryogenically treated.
Two system adjustments are provided: high-frequency energy (750Hz to 26kHz) and presence (2.5kHz to 5.0kHz), each +/-3dB. Sensitivity is 96dB, nominal impedance is 8 ohms, and the recommended amplifier power is 20 to 350 watts RMS. Each speaker weighs 72kg. The finish is Piano Gloss Walnut.
Vidéo
Spécifications
- Marque
- Fyne Audio
- Modèle
- F1-12S
- Catégorie
- Hi-Fi et audio maison › Enceintes
Audio
- System type
- 2 way, downwards firing port, with BassTrax Tractrix diffuser
- Frequency response (-6dB typical in room)
- 24Hz - 26kHz
- Sensitivity (2.83 Volt @ 1m)
- 96dB
- Nominal impedance
- 8 Ohm
- Crossover frequency
- 750Hz
- Crossover type
- Bi-wired passive low loss, 2nd order low pass, 2nd order high pass, Deep Cryogenically Treated
- System adjustments
- High frequency energy (750Hz - 26kHz) +/-3dB; Presence (2.5kHz - 5.0kHz) +/- 3dB
Drivers
- Drive unit complement
- 1 x 300mm IsoFlare point source driver with FyneFlute surround, multi-fibre bass / midrange cone, with 75mm titanium dome compression tweeter, neodymium magnet system
Power
- Recommended amplifier power (Watt RMS)
- 20 - 350
- Continuous power handling (Watt RMS)
- 175
- Peak power handling (Watt)
- 600
Physical
- Dimensions (H x W x D)
- 1350 x 450 x 680mm (53.2" x 17.7 x 28.6")
- Net weight (each)
- 72kg
- Finishes
- Piano Gloss Walnut
- Plinth
- 20kg machined aluminium
- S-Trax position (from cabinet front edge)
- 133mm (5.2")
- SuperTrax position (from cabinet front edge)
- 109mm (4.3")
In the box
- Supplied quantity
- 1 pair
- Documentation
- F1S Floorstander Manual