Lark M1
The Lark M1 is a compact 2.4GHz wireless lavalier system with an omnidirectional clip-on transmitter and a small receiver. It targets vloggers, YouTubers and streamers recording to cameras or phones, and comes as a Solo or Duo set.
- Omnidirectional lavalier with 2.4GHz adaptive frequency hopping
- Up to 200m (650ft) open-space range, lab test
- 48kHz/16bit audio using the LC3 codec
- Switchable HearClear noise cancellation
- Up to 8 hours per transmitter or receiver charge
- Duo set includes a charging and storage case
Photos
5Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un Lark M1, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The Lark M1 pairs lightweight clip-on transmitters with a plug-in receiver. Each transmitter has an omnidirectional capsule, and audio is sent over 2.4GHz adaptive frequency hopping at 48kHz/16bit using the LC3 codec. Stated open-space range is 200m (650ft) in lab tests, or 40m with free movement.
A HearClear noise cancellation function can be switched on or off from the transmitter, and a three-step High/Mid/Low volume preset covers typical setups. Manual pairing and mode switching are available in the advanced settings. The Duo set includes a charging case that stores and recharges two transmitters and the receiver, giving roughly 20 hours of total operation, while each unit can also be charged directly over USB-C.
The receiver connects through a 3.5mm TRS cable for cameras or a TRS-to-TRRS cable for phones and other 3.5mm TRRS devices. Optional USB-C and Lightning cables cover Android devices, iPads and iPhones.
Vidéo
Spécifications
- Marque
- Hollyland
- Modèle
- Lark M1
- Catégorie
- Sonorisation live › Systèmes sans fil
Audio
- Microphone type
- Built-in, omnidirectional
- Frequency range
- 20Hz~20KHz
- Maximum SPL
- 110dB SPL
- Input dynamic range
- 86dB
- Sampling rate / bit depth
- Up to 48kHz / 16bit
- Codec
- LC3
- Noise cancellation
- HearClear, switchable
- Volume presets
- 3 levels (High / Mid / Low)
Wireless
- Wireless transmission
- 2.4GHz Adaptive Frequency Hopping (AFH)
- Transmission range
- 40m (free movement), 200m / 650ft (line of sight, lab test)
Connectivity
- Receiver output
- 3.5mm phone/camera interface port
- Charging port
- USB-C on each TX, RX and charging case
- Included cables
- 3.5mm TRS patch cable, 3.5mm TRS to TRRS patch cable, USB cable
- Optional cables
- TRS to USB-C (Android/iPad), TRS to Lightning (iPhone)
Power
- Transmitter battery
- 140mAh (0.518Wh)
- Receiver battery
- 200mAh (0.76Wh)
- Charging case battery
- 1400mAh (5.18Wh)
- Runtime (TX / RX)
- 8 hours each
- Charging time
- 1.5 hours (TX, RX and charging case)
- Charging case capacity
- Up to 2 full charges for 2 TX and 1 RX
Physical
- Transmitter dimensions (H×W×D)
- 48×21.5×10 mm
- Receiver dimensions (H×W×D)
- 48.3×27.6×11 mm
- Charging case dimensions (H×W×D)
- 83×60×30 mm
- Transmitter weight
- 11.8g (0.4oz)
- Receiver weight
- 17.5g (0.62oz)
- Charging case weight
- 80g (2.8oz)
- Colour
- Cool Black
In the box
- Duo set
- Charging case, 2 transmitters, receiver, 2 furry windshields, cables, user manual, warranty card
- Solo set
- 1 transmitter, receiver, 1 furry windshield, cables, user manual, warranty card