Solidcom C1 PRO
A wireless intercom headset system with dual-mic environmental noise cancellation, designed for production crews working in loud settings. It runs on DECT 6.0 with up to 350 m line-of-sight range and can be used with or without a hub.
- Dual-mic ENC, about 20 dB noise reduction
- DECT 6.0, up to 1,100 ft (350 m) line of sight
- Non-hub packages for 2–8 members; hub system up to 9
- Hub adds A/B grouping, ANNOUNCE and USB audio
- About 170 g per headset, replaceable battery
- Compatible with the Solidcom C1 system
Photos
7Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un Solidcom C1 PRO, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The Solidcom C1 Pro is a full-duplex wireless intercom headset system. Each headset has a directional main microphone plus an omnidirectional secondary microphone that samples ambient noise, and an ENC algorithm removes that noise on the speaker's side. Acoustic echo cancellation works across a 150 Hz to 7 kHz range, and a felt wind filter covers the main mic for outdoor use.
The system works in two ways. In the non-hub setup, a red-marked master headset links to blue-marked remote headsets, in packages for teams of 2 to 8. In the hub-based setup, a hub with a wired headset supports up to 9 members, A and B grouping, an ANNOUNCE function that mutes all other headsets, and cascading of up to 3 systems over IP. Master headsets cannot be used in a hub system.
The headsets weigh about 170 g with battery, use replaceable lithium batteries and are backward compatible with the Solidcom C1. The hub offers 2- and 4-wire audio I/O, USB audio for computer calls, and power from NP-F, V-mount, G-mount batteries or DC.
Vidéo
Spécifications
- Marque
- Hollyland
- Modèle
- Solidcom C1 PRO
- Catégorie
- Sonorisation live › Systèmes sans fil
Wireless
- Transmission range
- 1,100ft (350m) LOS
- Technology
- DECT 6.0
- Modulation mode
- GFSK
- RX sensitivity
- <-90dBm
- Frequency band (USA and Canada)
- 1920-1930 MHz
- Frequency band (Europe, Australia, much of Asia)
- 1880-1900 MHz (10 channels)
- Frequency band (Japan)
- 1893-1906 MHz (J-DECT)
- Frequency band (Brazil)
- 1910-1920 MHz (10 channels)
Audio
- Frequency response (ENC OFF)
- 150Hz–7kHz (fluctuation range: ±6dB)
- Frequency response (ENC ON)
- 150Hz–7kHz
- Signal-to-noise ratio
- 71±2dB@94dBSPL,1kHz
- Distortion
- <1%@94dBSPL, 150Hz–7kHz
- Microphone type
- Electret
- Input SPL
- >115dBSPL
- Output SPL
- 94±3dBSPL (@94dBSPL, 1kHz)
- ENC
- 20dB±2
Power
- Battery capacity
- 700mAh（2.66Wh）
- Remote headset operation time
- >10 hours (ENC ON)
- Master headset operation time (5 remotes)
- >5 hours (ENC ON)
- Master headset operation time (7 remotes)
- >4 hours (ENC ON)
- Charging time
- About 2.5 hours
- Hub power options
- NP-F battery, V-mount battery, G-mount battery, DC power
System
- Non-hub system team size
- 2 to 8 members
- Hub-based system team size
- Up to 9 members
- Hub cascading
- Up to 3 systems via IP network
Physical
- Net weight
- About 170g (6oz) with the battery included for each wireless headset
- Operating temperature
- 0℃ to 45℃
- Storage temperature
- –10℃ to 60℃
In the box
- Headset package
- Master & remote headsets, battery, microphone cushion, over-ear leather cushion, on-ear foam cushion, DC adapter, USB-A to Type-C cable, storage case, user manual, warranty card
- Hub package
- Hub, 0B10 wired headset, remote headset, high-gain antenna, battery, 12V2A DC adapter, USB-A to USB-C cable, storage case, user manual, warranty card