2M Blue Verso
The 2M Blue Verso is a moving-magnet phono cartridge with a nude elliptical stylus, built for bottom-mount headshells. It suits vinyl listeners who want more detail than the 2M Red from a turntable that mounts the cartridge from underneath.
- Bottom-mount (half inch) cartridge for headshells that mount from underneath
- Nude elliptical diamond stylus, r/R 8/18 µm, on aluminium cantilever
- Quad coils with split pole pins and OFC coil wire
- Output 5.5 mV at 1 kHz, 5 cm/sec
- Tracking force 1.6-2.0 g, recommended 1.8 g
- Recommended load 47 kOhm, 150-300 pF
Photos
5Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un 2M Blue Verso, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The 2M Blue Verso is the bottom-mount version of Ortofon's 2M Blue. It has a nude elliptical diamond stylus on an aluminium cantilever, and a body made of polymer and aluminium. It is intended for turntables whose headshells take the cartridge from below, using a half-inch mount.
The generator uses quad coils with split pole pins and OFC coil wire. Split pole pins are an Ortofon design meant to give a moving-magnet cartridge a flatter frequency response, closer to that of a moving-coil type. Output is 5.5 mV, and the manufacturer positions the sound as more dynamic, open and detailed than the 2M Red.
Recommended tracking force is 1.8 g within a 1.6-2.0 g range. The cartridge loads at 47 kOhm with 150-300 pF of capacitance, which is the usual range for a moving-magnet phono input. A replacement guide covers swapping the screws on the Verso top plate with a Torx 8 key, and a user guide is available for download.
Vidéo
Spécifications
- Marque
- Ortofon
- Modèle
- 2M Blue Verso
- Catégorie
- Matériel DJ › Cellules et pointes de lecture
Audio
- Output voltage at 1 kHz, 5 cm/sec
- 5.5 mV
- Channel separation at 1 kHz
- 25 dB
- Channel balance at 1 kHz
- 1.5 dB
- Frequency response 20 Hz - 20 kHz
- 2 / - 1 dB
- Tracking ability at 315 Hz
- 80 µm
- Compliance, dynamic, lateral
- 20 µm/mN
Stylus and Cantilever
- Stylus type
- Nude Elliptical
- Stylus tip radius
- r/R 8/18 µm
- Cantilever material
- Aluminium
- Tracking angle
- 20°
Electrical
- Coil system
- Quad-coils with split pole pins and OFC Coil Wire
- Coil wire material
- OFC Wire
- Internal impedance, DC resistance
- 1.3 kOhm
- Internal inductance
- 700 mH
- Recommended load resistance
- 47 kOhm
- Recommended load capacitance
- 150-300 pF
Setup
- Tracking force range
- 1.6-2.0 g (16-20 mN)
- Tracking force, recommended
- 1.8 g (18 mN)
- Mounting type
- Half inch bottom mount
Physical
- Cartridge body material
- Polymer and aluminum
- Cartridge colour
- Black/Blue
- Cartridge weight
- 7.2 g
- Premounted cartridge weight
- 16.7 g