Pick it MM E
Entry-level moving-magnet phono cartridge with a conical diamond stylus and a lightweight ABS body. It suits vinyl listeners who want an affordable, general-purpose cartridge for a turntable with a half-inch mounting.
- Moving-magnet (MM) cartridge
- Conical diamond stylus
- Low-mass system with neodymium magnet
- Damped ABS body, 5.5 g
- Output 3.8 mV at 1 kHz
- Tracking force 2.0 g recommended
Photos
8Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un Pick it MM E, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The Pick it MM E is a moving-magnet cartridge that converts record grooves into an electrical signal. It uses a low-mass generator system built around a miniature neodymium magnet, which lowers inertia and improves tracking. The stylus is a conical diamond, and the stylus is shielded by a protective design.
The body is made from resonance-optimised ABS and the cartridge weighs about 5.5 g. The highly damped housing is intended to reduce vibration-induced coloration and keep background noise low, making it a general-purpose option for a wide range of records.
It mounts to a tonearm headshell using the 1/2 inch standard. Output voltage is 3.8 mV at 1 kHz, the recommended tracking force is 2.0 g within a 1.8 to 2.2 g range, and the recommended load resistance is 47 kΩ. Frequency response is 10 to 20,000 Hz within ±2 dB.
Vidéo
Spécifications
- Marque
- Pro-Ject
- Modèle
- Pick it MM E
- Catégorie
- Matériel DJ › Cellules et pointes de lecture
Audio
- Cartridge principle
- MM (Moving-Magnet)
- Output voltage at 1 kHz
- 3,8 mV (3,54 cm/sec)
- Frequency response
- 10 - 20 000 Hz +/- 2dB
- Tracking ability at 315Hz
- 70 μm
- Dynamic compliance
- 14 μm/mN
Stylus
- Stylus type
- Conical
- Tracking force, range
- 1,8 - 2,2 g (mN)
- Tracking force, recommended
- 2,0 g (mN)
- Tracking angle
- 23°
Connectivity
- Mounting standard
- 1/2 inch
- Recommended load resistance
- 47 kΩ
Physical
- Height stylus tip to top mounting surface
- 18,2 mm
- Cartridge weight
- 5,5 g
- Body material
- Resonance optimized ABS
- Generator magnet
- Miniature neodymium