VT-4
Compact battery-powered vocal effects processor with dedicated pitch and formant faders, Auto-Pitch, vocoder, harmony, megaphone and reverb/delay effects. Aimed at singers, electronic artists, DJs and streamers, and it works as a USB audio interface.
- Dedicated pitch and formant faders
- Auto-Pitch knob with hard-tune effect
- Robot, Megaphone, Vocoder, Harmony and Reverb effects
- 8 scene memories
- MIDI IN for keyboard control
- USB audio interface, 24-bit up to 192 kHz
Photos
8Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un VT-4, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The VT-4 is a hands-on voice processor built around physical controls rather than menus. Dedicated faders adjust pitch and formant in real time, and an Auto-Pitch knob sets the amount of hard-tuned correction. Five effect groups (Robot, Megaphone, Vocoder, Harmony and Reverb) each offer four one-touch variations, and several effects can be combined at once. Settings can be stored by holding a preset button, with eight scene memories available.
A MIDI keyboard connected to the MIDI IN jack can control the Auto-Pitch, harmony and vocoder engines, so the voice can be tuned to played notes or harmonised along with chords. Without a keyboard, the harmony and vocoder effects respond to the voice alone.
Inputs are a rear combo XLR/TRS jack with phantom power and a front stereo mini jack with plug-in power. Outputs are two 1/4-inch line jacks and a headphone jack. A USB Type-B port provides audio to and from a computer, which suits streaming, podcasting and recording. Power comes from four AA batteries or USB bus power.
Vidéo
Spécifications
- Marque
- Roland
- Modèle
- VT-4
- Catégorie
- Studio › Préamplis et outboard
Inputs
- Mic input level (nominal)
- -40 to -12 dBu (variable)
- Mic in impedance (rear)
- 4.4 k ohms
- Mic in impedance (front)
- 2.2 k ohms
- Rear MIC IN jack
- Combo type (XLR, 1/4-inch TRS phone), balanced, phantom power +48 V, 10 mA max.
- Front MIC IN jack
- Stereo miniature phone type (plug-in power)
Outputs
- Line out level (nominal)
- -10 dBu
- Line out impedance
- 1 k ohm
- Headphones impedance
- 24 ohms
- Line out jacks
- 1/4-inch phone type (L/MONO, R/BYPASS)
- Headphones jack
- Stereo miniature phone type
Connectivity
- USB port
- USB type B
- MIDI
- MIDI IN jack
- USB audio
- Yes
Audio
- Scene memory
- 8
- Effect groups
- Robot, Megaphone, Vocoder, Harmony, Reverb
- PC interface signal processing
- 24 bits
- AD/DA conversion
- 24 bits
- Sampling frequency
- 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Power
- Power supply
- 4 x AA Ni-MH (HR6), 4 x AA alkaline (LR6) or USB bus power
- Current draw
- 500 mA
- Battery life, alkaline (phantom off / on)
- Approx. 6 hours / 4 hours
- Battery life, Ni-MH (phantom off / on)
- Approx. 7 hours / 5.5 hours
Physical
- Dimensions (W x D x H)
- 174 x 133 x 58 mm (6-7/8 x 5-1/4 x 2-5/16 in)
- Weight (with batteries)
- 554 g (1 lb 4 oz)
In the box
- Included
- Owner's Manual, "USING THE UNIT SAFELY" leaflet, 4 x AA alkaline batteries