Concept MM V2
Moving-magnet phono cartridge with an aluminium body and elliptical diamond on an aluminium cantilever. It has a 3.3 mV output and suits turntable owners who want an MM cartridge for common tonearms.
- Moving-magnet cartridge with aluminium body
- Elliptical diamond on aluminium cantilever
- Output about 3.3 mV at 1 kHz, 5 cm/s
- Frequency response 20 Hz – 20 kHz
- Tracking force 2.2 g ± 0.3 g
- 2-year warranty with card returned within 14 days
Photos
5Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un Concept MM V2, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The concept V2 is the aluminium-bodied model in Clearaudio's MM V2 cartridge series. Other cartridges in the series use hand-polished ebony bodies, while this one uses a resonance-optimised aluminium body. It carries an elliptical diamond on an aluminium cantilever, and its moving mass is kept low.
The moving-magnet cartridges are measured several times across four stages, analysed and hand-selected. This is meant to keep the two stereo channels closely matched and phase and transient distortion low. The nominal output is about 3.3 mV at 1 kHz and 5 cm/s, with a frequency response of 20 Hz to 20 kHz. The recommended tracking force is 2.2 g ± 0.3 g.
The cartridge connects to a turntable's tonearm through the headshell and to a phono stage designed for moving-magnet input. The recommended load is 47 kΩ with 100 pF capacitance. The series is described as working well with all common tonearms. The cartridge weighs 8.4 g.
Vidéo
Spécifications
- Marque
- Clearaudio
- Modèle
- Concept MM V2
- Catégorie
- Hi-Fi et audio maison › Platines vinyle
Audio
- Cartridge type
- Moving magnet (MM)
- Frequency response
- 20 Hz – 20 kHz
- Output voltage (1 kHz, 5 cm/s)
- ~ 3.3 mV
- Channel separation (1 kHz)
- 20 dB
- Channel balance (1 kHz)
- 2 dB
- Tracking ability
- 80 µm
- Stylus compliance
- 15 µ/mN
Stylus
- Cantilever / diamond cut
- Aluminium / elliptical
- Recommended tracking force
- 2.2 g ± 0.3 g
Electrical
- Coil impedance (1 kHz)
- 0.66 kΩ
- Coil inductance
- 400 mH
- Load resistance
- 47 kΩ
- Capacitive load
- 100 pF
Physical
- Weight
- 8.4 g
- Weight of complete system
- 8.6 g (± 0.2 g)
- Body material
- Aluminium
Warranty
- Manufacturer warranty
- 2 years (guarantee card returned within 14 days of purchase)