Bass Preacher
Compact analog compressor/sustainer pedal built for bass guitar, with true bypass and a three-position attack switch. It suits bassists with passive or active instruments who want light levelling or heavy compression.
- Analog compressor/sustainer for bass guitar
- Up to 21 dB of gain reduction with make-up gain
- Three-position attack switch: Fast, Medium, Slow
- Input sensitivity -10 dBu to +2 dBu
- True bypass with status LED
- 9V battery included; 33mA current draw
Photos
8Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un Bass Preacher, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The Bass Preacher is a mono, analog compressor/sustainer in a die-cast enclosure, aimed at bass guitar. Two knobs set the amount of compression (Sustain) and the make-up gain (Vol), so the output can be brought back to full volume even at maximum compression. Gain reduction reaches up to 21 dB, which covers anything from gentle levelling to a heavily squashed tone.
A toggle switch selects Fast, Medium or Slow attack to change how quickly compression sets in. Input sensitivity spans -10 dBu to +2 dBu, so the pedal can be used with passive and active basses of different output levels. A red LED shows when the effect is engaged, and the footswitch toggles between the effect and true bypass.
The signal goes in through a 1/4" Input jack and leaves through the Amp jack. Power comes from an included 9V battery, or from an optional 9.6VDC 200mA adapter that is sold separately. Current draw is 33mA.
Vidéo
Spécifications
- Marque
- Electro-Harmonix
- Modèle
- Bass Preacher
- Catégorie
- Effets et pédales
Audio
- Circuit
- Analog
- Audio
- Mono
- Effect type
- Compressor / Sustainer
- Input sensitivity
- -10 dBu to +2 dBu
- Maximum gain reduction
- 21 dB
- Bypass
- True Bypass
Controls
- Vol knob
- Sets the amount of make-up gain
- Sustain knob
- Sets the amount of compression
- Attack switch
- Fast / Medium / Slow
- Footswitch
- Toggles effect on and true bypass
- Status LED
- Red, lit when effect is engaged
Connectivity
- Input jack
- 1/4"
- Amp jack
- Audio output
Power
- Power supply
- 9V battery included
- Optional adapter
- 9.6VDC-200mA (not included)
- Current draw
- 33mA
Physical
- Dimensions
- 4.5 x 2.75 x 2.1 in
- Construction
- Die-cast
In the box
- Battery
- 9V battery