F708TM
The F708TM is a compact two-way home theatre monitor with a 200mm IsoFlare point-source driver, built for dedicated cinema rooms and custom installs. It can be wall-mounted on VESA fittings or flown from integrated rigging points.
- 200mm IsoFlare point-source driver with 25mm magnesium dome tweeter
- VESA-compatible wall mounting and integrated flying points
- Sensitivity 92dB (2.83V @ 1m), 54Hz–34kHz (-6dB in room)
- Handles 180W RMS continuous, 360W peak
- Tongue-and-groove MDF cabinet with internal bracing
- Designed and made in Scotland; Black or Clear finish
Photos
7Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un F708TM, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The F708TM is a single-unit theatre monitor from the F700TM Series, designed and made in Scotland. It uses a 200mm IsoFlare point-source driver, with a multi-fibre bass/midrange cone and a 25mm magnesium dome compression tweeter at its centre. The crossover sits at 1.8kHz.
The cabinet is tongue-and-groove, high-rigidity MDF with extensive internal bracing to limit resonance. Two forward-firing ports extend the low end, and the speaker is rated for 40–180W RMS amplifiers, with a sensitivity of 92dB and a rated peak SPL of 117dB.
For installation, the speaker can be fixed straight to a wall using VESA-compatible fittings or hung from integrated flying points. It is offered in Black and Clear finishes. It is a passive speaker and is driven from a separate amplifier or AV receiver.
Spécifications
- Marque
- Fyne Audio
- Modèle
- F708TM
- Catégorie
- Hi-Fi et audio maison › Enceintes
Audio
- System type
- 2 way forward firing ports
- Drive unit complement
- 1 x 200mm IsoFlare point source driver, multi-fibre bass / midrange cone, with 25mm magnesium dome compression tweeter, ferrite magnet system
- Sensitivity (2.83 Volt @ 1m)
- 92dB
- Frequency response (-6dB typical in room)
- 54Hz - 34kHz
- Crossover frequency
- 1.8kHz
- Crossover type
- 2nd order low pass, 1st order high pass
Power
- Recommended amplifier power (Watt RMS)
- 40 - 180
- Continuous power handling (Watt RMS)
- 180
- Peak power handling (Watt)
- 360
- Average rated maximum SPL
- 114dB
- Peak rated maximum SPL
- 117dB
Physical
- Dimensions (H x W x D)
- 390 x 300 x 210mm (15.4 x 11.8 x 8.3")
- Net weight (each)
- 9.8kg (21.6lbs)
- Cabinet construction
- Tongue and Groove High-rigidity MDF with extensive internal bracing
- Colour options
- Black, Clear
- Mounting
- VESA compatible fittings or integrated flying points
General
- Series
- F700TM Series
- SKU
- F8000113
- Sold as
- Single unit
- Origin
- Designed and manufactured in Scotland