FA502iC
The FA502iC is a two-way in-ceiling or in-wall speaker built around a 200mm (8") IsoFlare point-source driver with a 25mm titanium dome tweeter. It is aimed at home installs where a hidden speaker with wide, even dispersion is wanted.
- 200mm (8") IsoFlare point-source driver with 25mm titanium tweeter
- In-ceiling or in-wall mounting, 248mm cut-out
- 91dB sensitivity, 8 ohm nominal impedance
- Frequency response 35Hz - 34kHz (-6dB, in room)
- Round and square paintable magnetic grilles supplied
- Self-aligning clamps and spring clamp terminals
Photos
6Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un FA502iC, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The FA502iC is a custom-install loudspeaker taken from the maker's F500 series design. It uses a single 200mm (8") IsoFlare point-source driver, with a multi-fibre bass/midrange cone, a FyneFlute surround and a 25mm titanium dome compression tweeter. A passive crossover at 1.7kHz is tuned for infinite baffle use. The driver is designed to give 360-degree isotropic dispersion and time alignment across the frequency range.
It is intended for in-ceiling or in-wall mounting. The chassis has self-aligning clamps with a travel of 5-50mm and spring clamp cable terminals. Both a round and a square low-profile magnetic grille are supplied. Both are paintable and carry an acoustic scrim cloth. A cut-out of 248mm is needed, with 120.5mm of depth behind the mounting surface.
The speaker is passive, with an 8 ohm nominal impedance and 91dB sensitivity. It is driven from a separate amplifier rated at 30-150W RMS and connects through its spring clamp terminals. A cut-out template and a manual shared with the FA300iC range are available for download.
Spécifications
- Marque
- Fyne Audio
- Modèle
- FA502iC
- Catégorie
- Hi-Fi et audio maison › Enceintes
Audio
- System type
- 2 way IsoFlare loudspeaker for in ceiling or in wall application
- Frequency response (-6dB typical in room)
- 35Hz - 34kHz
- Sensitivity (2.83 Volt @ 1m)
- 91dB
- Nominal impedance
- 8 Ohm
- Crossover frequency
- 1.7kHz
- Crossover type
- Passive 2nd order low pass, 1st order high pass
- Suggested min volume
- 18 L
Drivers
- Drive unit complement
- 1 x 200mm (8”) IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm titanium dome compression tweeter
Power
- Recommended amplifier power
- 30 - 150 Watt RMS
- Continuous power handling
- 75 Watt RMS
- Peak power handling
- 300 Watt
Connectivity
- Terminals
- Spring clamp cable terminals
Physical
- Dimensions - Dia x Depth
- 273 x 123mm (10.6” x 4.8”)
- Square grille dimensions
- 281 x 281mm (11.1 x 11.1”)
- Round grille diameter
- 281mm (11.1”)
- Cut-out diameter
- 248mm (9.8”)
- Depth behind mounting surface
- 120.5mm (4.7”)
- Clamp travel
- 5 - 50mm (0.2 - 2.0”)
- Net weight (each)
- 2.5kg (5.5lbs)
In the box
- Grilles
- Round and square paintable low profile magnetic grilles with acoustic scrim cloth
- Sold as
- Single unit