5805· Amplificateurs
Integrated amplifier that combines a preamplifier, MM/MC phono stage, ESS Sabre-based DAC and class AB power amplifier in one chassis. It suits listeners who want to run vinyl, digital and Bluetooth sources into a single high-end stereo system.
- 125 W/ch at 8 ohms, nearly 250 W/ch at 4 ohms, stable to 2 ohms
- Built-in MM/MC phono stage with hybrid gain topology
- PrecisionLink II DAC: ESS Sabre 32-bit, PCM 384 kHz, DSD 11.2 MHz
- MQA decoding on all digital inputs, Bluetooth with aptX HD
- XLR and RCA line inputs, front 6.35 mm headphone output
- Ethernet, RS-232, 12V trigger and IR control ports
Photos
8Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un 5805, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The № 5805 is a hybrid integrated amplifier with a discrete, direct-coupled preamp, a class AB power section and a phono input for MM or MC cartridges. The power stage is fed by an oversized toroidal transformer of 500+ VA with separate secondary windings per channel. It is rated at 125 W per channel into 8 ohms and nearly 250 W into 4 ohms, and it stays stable down to 2 ohms.
The digital section uses the PrecisionLink II DAC with a 32-bit ESS Sabre converter. It has one asynchronous USB, one coaxial and two optical inputs, handles PCM up to 32 bit/384 kHz and DSD up to 11.2 MHz, and decodes MQA. A Bluetooth receiver supports aptX HD. The line stage can drive headphones directly from the front-panel 6.35 mm jack.
Analog connections are one balanced XLR and two RCA line inputs, an RCA phono input, a variable RCA line output and two pairs of speaker terminals. Ethernet, RS-232, 12 V trigger and IR ports allow system integration. Setup, configuration backup and firmware updates are available through an internal web page, and a Kontrol app and an IR remote are supported.
Vidéo
Spécifications
- Marque
- Mark Levinson
- Modèle
- 5805
- Catégorie
- Hi-Fi et audio maison › Amplificateurs
Digital inputs
- USB
- 1 x USB 2.0 (USB-B), asynchronous
- Coaxial S/PDIF
- 1 x RCA
- Optical S/PDIF
- 2 x Toslink
- PCM / DSD support
- 384kHz/32 bit PCM and DSD 11.2MHz
- Bluetooth
- Audio input including aptX HD
- MQA
- Full decoding on all digital inputs including asynchronous USB
Analog inputs
- Balanced line
- 1 x XLR stereo
- Single-ended line
- 2 x RCA stereo
- Phono
- 1 x RCA (MM/MC)
- Home theater
- HT processor pass-thru mode
Outputs
- Line output
- 1 x RCA stereo (variable)
- Headphone output
- 1 x 1/4-inch/6.35mm jack (front panel)
- Speaker outputs
- 2 pairs high-current binding posts
Audio
- Output power at 8 ohms
- 125W/channel
- Output power at 4 ohms
- nearly 250W/channel
- Load stability
- Stable operation down to 2 ohms
- Amplifier class
- Class AB, fully discrete, direct-coupled
- DAC
- Mark Levinson PrecisionLink II, ESS Sabre 32-bit
Control and connectivity
- Network
- Ethernet (RJ-45)
- Serial
- RS-232 (DB9)
- Trigger
- 12V DC trigger input and output (3.5mm jack), output 100mA maximum
- IR input
- 3.5mm jack
- Remote and app
- Handheld IR remote, Mark Levinson Kontrol app for Android and iOS
Power
- Mains voltage
- 100VAC, 115VAC, or 230VAC, factory set
- Power transformer
- 500+ VA toroidal
- Standby, Green mode
- <0.4W
- Standby, Power Save mode
- 7W
- Standby, Normal mode
- 70W
- Power on, quiescent
- 120W
- Power on, maximum
- 500W
Physical
- Dimensions (H x W x D)
- 5.72"/145mm x 17.25"/438mm x 19.98"/507mm
- Height without feet
- 5.25"/133mm
- Weight
- 62 lbs/28.1kg
- Packed dimensions (H x W x D)
- 13.0"/330mm x 24.0"/610mm x 28.0"/711mm
- Packed weight
- 73 lbs/33.0kg
- Origin
- Designed and handcrafted in the USA
In the box
- Remote control
- Solid aluminum IR remote included