1959 Modified
Marshall Plus commercialisé

1959 Modified

A 100-watt, all-valve guitar amplifier head that reworks the 1959 'Plexi' design with a master volume, a switchable bright cap and a two-mode gain boost. It suits guitarists who want classic rock crunch at lower volumes, at home, in the studio or on stage.

  • 100W valve guitar amplifier head
  • Two channels with shared EQ
  • Master volume for crunch at low levels
  • Switchable bright cap
  • Gain boost with two overdrive modes
  • 4 x EL34 power valves, made in UK
Vendre le même

Photos

8

Annonces

Pas encore d’annonce pour ce modèle

Quand quelqu’un vendra un 1959 Modified, les annonces et l’historique des ventes s’afficheront ici.

Vendre le même

Description

The 1959 Modified is a two-channel, 100W valve head built around the classic 1959 circuit, with three added controls for modern use. A master volume allows high-gain crunch at lower levels, a switchable bright cap changes the high-frequency character from sharp and vintage to smoother and warmer, and a gain boost adds either classic breakup or a higher-gain mode.

The two channels share one EQ section with treble, middle, bass and presence controls. The power stage uses four EL34 valves, and the preamp uses ECC83 valves, with a further ECC83 as phase splitter. Two overdrive modes are available, described as diode clipping and transistor clipping.

For connection, the head has two 1/4" jack speaker outputs with a selectable 16Ω, 8Ω or 4Ω load. It is designed and engineered in the UK and built at the Bletchley, England factory. The finish is black.

Vidéo

Spécifications

Marque
Marshall
Modèle
1959 Modified
Catégorie
Guitares et basses

General

Channels
Two (with shared EQ controls)
Technology
Valve
Colour
Black
Country of origin
Designed and engineered in UK. Made in UK.

Audio

Output wattage
100W
Preamp valves
2 x ECC83, 1 x ECC83 (phase splitter), and 4 x EL34
Controls
Treble, middle, bass, and presence
Master volume
Yes
Bright cap
Switchable
Gain boost
Two overdrive modes

Outputs

Speaker outputs
2 x 1/4" jack, selectable 16Ω / 8Ω / 4Ω load

Physical

Weight
21 kg / 46.3 LB
Width
741 mm / 29.2"
Height
294 mm / 11.6"
Depth
210 mm / 8.7"

Données : marshall.com; photos : Marshall product page · mis à jour le 2026-10-14 · Une erreur ? Écris-nous