M 50 V
Tube studio microphone reissuing the Neumann M 50, with a fixed omnidirectional small-diaphragm titanium capsule mounted in a 40 mm sphere. Aimed at classical, film-score and orchestral recording, including spaced omni and Decca Tree setups.
- Fixed omni pressure-transducer capsule in a 40 mm acrylic sphere
- K 33 Ti capsule made entirely of titanium
- Reissue of the M 50 c circuit with a lower-noise subminiature tube
- RF-proof 7-pin connector via KC 5 cable to NM V power supply
- Frequency range 20 Hz – 16 kHz, max SPL 118 dB
- Includes yoke shock mount and case; handmade in Germany
Photos
8Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un M 50 V, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The M 50 V is a reissue of the final 1960s revision of the M 50, the M 50 c, built to original specifications from the maker's archive. It is a pressure-transducer microphone with a fixed omni pattern. The small-diaphragm capsule sits flush in a 40 mm acrylic sphere, so the pattern is omnidirectional at low frequencies and becomes gradually more directional above 1000 Hz, with a smooth treble rise. Bass response extends to subsonic frequencies without proximity effect.
The K 33 Ti capsule has the same acoustics as the older K 53, but the diaphragm, backplate and housing are all titanium for better temperature and long-term stability. The circuit matches the M 50 c, using a lower-noise subminiature tube. The low-frequency corner is set to 12 Hz and can be changed to 30 Hz by Neumann Service through an internal switch.
The microphone connects with a 7-pin RF-proof connector taken from the broadcast M 250, via the supplied KC 5 cable to the NM V linear power supply, which has an XLR 3 F output. The NM V adjusts the heater voltage and mains voltage automatically. The set also has a yoke mount with mechanical decoupling and a cable holder, and a case. Everything is handmade in Germany.
Vidéo
Spécifications
- Marque
- Neumann
- Modèle
- M 50 V
- Catégorie
- Studio › Microphones
Audio
- Acoustical operating principle
- Pressure transducer
- Directional pattern
- Omni
- Frequency range
- 20 Hz – 16 kHz
- Sensitivity at 1 kHz into 1 kohm
- 19 mV/Pa ≅ -34.5 dBV ± 1 dB
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL)
- 79 dB
- Equivalent noise level, A-weighted
- 15 dB-A
- Signal-to-noise ratio, CCIR (re. 94 dB SPL)
- 67 dB
- Equivalent noise level, CCIR
- 27 dB
- Maximum SPL for THD 0.5%
- 118 dB SPL
- Lower corner frequency
- 12 Hz (–3 dB), switchable to 30 Hz internally
Outputs
- Rated impedance
- 200 ohms
- Rated load impedance
- 1000 ohms
- Maximum output voltage
- –8 dBu
Connectivity
- Microphone connector
- KC 5 cable (7-pin)
- Power supply unit output connector
- XLR 3 F
Power
- Power supply
- NM V
Physical
- Weight
- 800 g
- Diameter
- 80 mm
- Length
- 163 mm
- Color
- Nickel
In the box
- Microphone
- 1x M 50 V
- Power supply
- 1x NM V Pattern Control Unit
- Cable
- 1x KC 5 Cable
- Shock mount
- 1x MZ 49 A Shock Mount
- Case
- 1x M 50 V Case
- Documentation
- 1x Safety Guide, 1x Quick Guide