IB1S
Three-way studio monitor with a 10-inch carbon fibre/Nomex piston bass driver, fabric mid and high domes and Advanced Transmission Line loading. Used in mastering, broadcast and film scoring or post-production, in stereo or surround.
- 3-way passive monitor with ATL bass loading
- 250 mm carbon fibre/Nomex piston bass driver
- 75 mm fabric mid and 27 mm fabric soft dome HF
- Film filters: flat, 1.5 dB or 3 dB per octave HF roll-off
- Tri-wire or tri-amp input via 3 pairs of 4 mm sockets
- Frequency response 25 Hz to 25 kHz
Photos
5Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un IB1S, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The IB1S is a passive three-way monitor built around PMC's Advanced Transmission Line (ATL) bass loading. A 250 mm flat piston woofer made of carbon fibre and Nomex handles the low end, while a 75 mm doped fabric mid-range unit and a 27 mm fabric soft dome tweeter cover the rest of the range. The crossover points are 380 Hz and 3.8 kHz.
Film filters give two positions of high-frequency roll-off, 1.5 dB and 3 dB per octave, plus a flat setting. This option is part of the reason the model is used in film scoring and post-production. It can be set up in stereo or surround alongside its dedicated centre channel and the SB100 sub bass system.
The speaker connects through three pairs of 4 mm sockets, which allow tri-wire or tri-amp operation. It has a 4 ohm nominal impedance and 89 dB sensitivity, and the recommended amplifier power is 120 to 500 W. Each cabinet weighs 36 kg.
Vidéo
Spécifications
- Marque
- PMC
- Modèle
- IB1S
- Catégorie
- Studio › Enceintes de monitoring
Audio
- Design
- 3-way, Advanced Transmission Line (ATL)
- Frequency response
- 25Hz-25kHz
- Sensitivity
- 89dB 1W 1m
- Impedance
- 4 Ohm nominal
- Recommended amp power
- 120 - 500W
- Effective ATL length
- 2.4m 8ft
- Crossover frequency
- 380Hz & 3.8kHz
- HF film filters
- Flat, 1.5dB or 3dB per Oct roll off
Drivers
- LF
- 250mm PMC Carbon Fibre/Nomex piston driver
- MF
- 75mm doped fabric
- HF
- 27mm fabric soft dome
Connectivity
- Input connectors
- 3 Pairs 4mm Sockets (Tri-wire or Tri-Amp)
Physical
- Height
- 740mm 29.1"
- Width
- 330mm 13.0"
- Depth
- 465mm 18.3"
- Weight
- 36kg 79.2lbs
Warranty
- Extended warranty
- 20 years when registered within 10 days of purchase