MB2S
PMC Plus commercialisé

MB2S

Three-way passive studio monitor with a 310mm Radial bass driver, 75mm mid-range dome and 27mm soft-dome tweeter in an ATL transmission-line cabinet. Intended for mid-sized control rooms, soffit-mounted or on matching studio stands.

  • Passive three-way design with 310mm Radial bass driver
  • 75mm fabric dome mid and 27mm fabric soft-dome tweeter
  • ATL transmission-line loading, 3m effective length
  • Frequency response 20Hz-25kHz, sensitivity 91dB
  • Tri-wire or tri-amp via 3 pairs of 4mm sockets
  • Matching MB2S-C centre and XB2S subwoofers for surround
Vendre le même

Photos

7

Annonces

Pas encore d’annonce pour ce modèle

Quand quelqu’un vendra un MB2S, les annonces et l’historique des ventes s’afficheront ici.

Vendre le même

Description

The MB2S is a large passive three-way monitor aimed at mid-sized control rooms. It pairs a 310mm Radial low-frequency driver with a 75mm fabric dome mid-range unit and a 27mm fabric soft-dome tweeter. The bass driver has a cast alloy frame and a rear-vented magnet, which are intended to keep power compression down at high excursion and allow higher levels without losing definition.

The cabinet uses Advanced Transmission Line (ATL) bass loading with an effective line length of 3m (10ft), rather than a ported or sealed enclosure. Crossover points are 380Hz and 3.8kHz, and the stated frequency response is 20Hz to 25kHz. It is designed for soffit mounting or for use on custom studio stands.

Connection is through three pairs of 4mm sockets, allowing tri-wire or tri-amp operation. Recommended amplifier power is 200-800W into a nominal 8 ohm load. A matching low-profile centre channel (MB2S-C) and XB2S subwoofers are available for surround setups. A 20 year warranty is offered when the product is registered within 10 days of purchase, subject to terms.

Spécifications

Marque
PMC
Modèle
MB2S
Catégorie
Studio › Enceintes de monitoring

Audio

Design
Passive, three-way
Frequency response
20Hz - 25kHz
Sensitivity
91dB 1W 1m
Impedance
8 Ohm nominal
Recommended amp power
200-800W
Crossover frequencies
380Hz & 3.8kHz
Bass loading
ATL, effective length 3m (10ft)

Drive units

LF
310mm PMC Radial driver
MF
75mm PMC fabric dome
HF
27mm fabric soft dome

Connectivity

Input connectors
3 pairs 4mm sockets (tri-wire or tri-amp)

Physical

Height
870mm (34.25")
Width
380mm (14.96")
Depth
535mm (21.06")
Weight
49kg (108lbs)

Warranty

Extended warranty
20 years when registered within 10 days of purchase

Related models

Centre channel
MB2S-C
Subwoofer
XB2S

Données : pmc-speakers.com; photos : PMC product page · mis à jour le 2026-10-13 · Une erreur ? Écris-nous