sE8 Omni
The sE8 omni is a small-diaphragm true condensor microphone with an omnidirectional pattern, aimed at acoustic instruments, orchestral and choir recording, drum overheads and room miking. It has switchable pads and low-cut filters and an all-metal body.
- Omnidirectional 1/2" true condenser, handmade capsule
- Switchable -10 / -20 dB pad
- Switchable 80 / 160 Hz low-cut filter
- 20 Hz – 20 kHz, 15 dB equivalent noise level
- Max SPL up to 161 dB with 20 dB pad
- All-metal body, gold-plated XLR, 48 V phantom power
Photos
8Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un sE8 Omni, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The sE8 omni is a pencil-style condenser microphone with a handmade 1/2" true condenser capsule that uses an ultra-thin gold-sputtered diaphragm. The capsule is tuned individually at the maker's own factory. The circuit is Class A, transformerless and built without integrated circuits.
Two switches shape the signal. A -10 dB / -20 dB pad gives headroom for loud sources such as brass, timpani and drums. A low-cut filter at 80 Hz or 160 Hz reduces low-frequency noise and footfall rumble and can offset proximity effect in close miking. The body is all metal with a gold-plated 3-pin XLR connector.
The mic connects over balanced XLR and runs on 48 V phantom power. The capsule is interchangeable with the sE8 cardioide capsule. Factory-matched pairs are hand-selected and measured in an anechoic chamber, and the pair version is supplied with a stereo bar, windscreens, clips and a metal case.
Vidéo
Spécifications
- Marque
- sE Electronics
- Modèle
- sE8 Omni
- Catégorie
- Studio › Microphones
Audio
- Capsule
- Handmade 1/2" true condenser
- Polar pattern
- Omnidirectional
- Frequency range
- 20 Hz - 20 kHz
- Sensitivity
- 20 mV / Pa (-34 dBV)
- Max SPL
- 141 / 151 / 161 dB (pad 0 / 10 / 20 dB)
- Equivalent noise level
- 15 dB
- Dynamic range
- 126 / 136 / 146 dB (pad 0 / 10 / 20 dB)
- Signal-to-noise ratio
- 79 dB
- Low-cut filter
- 80 / 160 Hz, 6 dB / Oct, switchable
- Pad
- 10 / 20 dB, switchable
Connectivity
- Connector
- 3-pin male XLR
Power
- Phantom power
- 48 V (P48 per IEC 61938)
- Electrical impedance
- 110 ohms
- Recommended load impedance
- >1k ohms
Physical
- Microphone diameter
- 23 mm (0.91 in)
- Microphone length
- 120 mm (4.72 in)
- Microphone weight
- 141 g (4.97 oz)
- Capsule length
- 22 mm (0.87 in)
- Capsule weight
- 26 g (0.92 oz)
In the box
- Microphone
- sE8 omni microphone
- Mic clip
- With thread adapter
- Windscreen
- Included