SPL Crossover
Analog active two-way crossover from SPL's Professional Fidelity series, for splitting a stereo signal between main speakers and a subwoofer or bass speaker in an analog hi-fi chain. It is no longer in production and has been succeeded by the Crossover Mk2.
- Analog active 2-way crossover, 50–120 Hz in 6 steps
- Low slope 24 dB/oct; Mid-Hi slope 12 or 24 dB/oct, or off
- Variable phase control, Low Cut at 20 Hz, sub level ±10 dB
- XLR and RCA inputs; balanced XLR Low and Mid-Hi outputs
- AMP CTL standby control for up to four 12 V trigger devices
Photos
7Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un SPL Crossover, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
The Crossover divides the signal into a Low section for a bass speaker or subwoofer (mono or stereo) and a Mid-Hi section for the main speakers. Both crossover frequencies are set separately in six steps between 50 Hz and 120 Hz. The Low filter has a fixed slope of 24 dB per octave, while the Mid-Hi filter switches between 12 and 24 dB per octave or can be turned off so the main speakers run full-range.
A switchable phase control (0° or -180° with a variable adjustment) aligns the subwoofer with the main speakers and drops out of the signal path when off. A Low Cut filter removes content below 20 Hz, and the subwoofer level can be changed from -10 dB to +10 dB. Two mechanical VU meters show the input levels, with a switch to adapt the display to different signal levels. The audio stages use SPL's 120V (VOLTAiR) technology with +/-60 V operating voltage.
Inputs are balanced XLR and gold-plated RCA. Outputs for Low and Mid-Hi are balanced XLR. The AMP CTL connection switches standby on up to four devices with a 12 V trigger input together with the Crossover, and can also let a preamplifier switch the Crossover's own standby.
Vidéo
Spécifications
- Marque
- SPL
- Modèle
- Crossover
- Catégorie
- Hi-Fi et audio maison › Autre Hi-Fi
Crossover
- Crossover frequencies
- 50 Hz to 120 Hz, 6 positions (Low and Mid-Hi set individually)
- Low filter slope
- 24 dB per octave
- Mid-Hi filter slope
- 12 dB or 24 dB per octave (switchable)
- Phase control
- 0° or -180°, variable
- Low Cut filter
- below 20 Hz
- Low level adjustment
- -10 dB to +10 dB
- Low output mode
- Mono or stereo
Inputs
- Analog inputs
- XLR (balanced) and RCA (gold-plated)
- Input impedance (RCA)
- 20 kΩ
- Input impedance (XLR)
- 20 kΩ
Outputs
- Outputs
- Low and Mid-Hi, balanced XLR
- Output impedance
- 75 Ω
- Maximum input & output gain
- 32.5 dB
Audio
- Frequency range (-3 dB)
- 10 Hz – 100 kHz
- THD (0 dBu, 1 kHz, MID-Hi filter on)
- 0.0008 %
- THD (0 dBu, 30 Hz, LOW filter on)
- 0.0014 %
- Noise (A-weighted, MID-HI output)
- -106 dBu
- Noise (A-weighted, LOW output)
- -104.9 dBu
- Dynamic range (MID-HI output)
- 138 dB
- Dynamic range (LOW output)
- 136.9 dB
- Crosstalk (1 kHz)
- -70 dBu
- Common mode rejection (XLR)
- -82 dBu
Power
- Mains voltage
- 230 V AC / 50 Hz; 115 V AC / 60 Hz (selectable)
- Power consumption
- max. 50 VA
- Stand-by power consumption
- < 0.3 W
- Operating voltage for analog audio
- +/- 60 V
Physical
- Dimensions (W x H x D)
- 278 x 100 x 300 mm
- Unit weight
- 5 kg
- Shipping weight
- 5.95 kg