Sumiko Songbird High
A high-output moving coil phono cartridge with an elliptical stylus, designed for listeners whose phono stage is built for moving magnet cartridges. It uses an open-body design and is hand-assembled in Japan.
- High output moving coil, 2.5 mV output
- Elliptical stylus, 0.3 x 0.7 mil
- Tracking force 1.8–2.2 g, recommended 2.0 g
- Weight 7.4 g; open-body Reference series design
- Re-tip exchange instead of user-replaceable stylus
Photos
7Annonces
Pas encore d’annonce pour ce modèle
Quand quelqu’un vendra un Sumiko Songbird High, les annonces et l’historique des ventes s’afficheront ici.
Vendre le mêmeDescription
Songbird High is a high-output moving coil cartridge that lets owners of MM phono stages use an MC design without a step-up device. It belongs to the maker's Reference series of open-body cartridges, in which internal resonance is damped inside the generator and the rest is passed through a bonded PEEK mounting plate and a stiff alloy headblock into the tonearm.
The generator uses pure metals, including high-purity copper coils, and a reinforced aluminum pipe cantilever of 0.5 mm diameter carries an elliptical 0.3 x 0.7 mil stylus. Output is 2.5 mV, internal impedance is 135 Ω and the recommended tracking force is 2.0 g. The cartridge weighs 7.4 g.
The stylus is not user-replaceable. Worn cartridges are serviced through a re-tip exchange via a dealer, and the maker's trade-in discount applies to US customers only. Each cartridge is hand-assembled by Excel Sound in Yokohama, Japan.
Spécifications
- Marque
- Sumiko
- Modèle
- Songbird High
- Catégorie
- Matériel DJ › Cellules et pointes de lecture
Design
- Design principle
- High Output Moving Coil
- Series
- Reference Series Cartridges
- Coils
- High-Purity Copper
- Mass & dimension
- 7.4g
Stylus
- Stylus
- Elliptical (0.3 x 0.7mil)
- Cantilever
- ⌀0.5mm Reinforced Aluminum Pipe
- Replacement stylus unit
- Re-Tip Exchange (See Dealer)
Electrical
- Output
- 2.5mV (3.54cm/sec, 1kHz)
- Internal impedance
- 135Ω (1kHz)
- Load impedance
- 47kΩ
- Capacitance
- 100pF – 200pF
- Frequency response
- 12Hz – 30kHz
- Channel separation
- 30dB (1kHz)
- Channel balance
- <1dB (1kHz)
Tracking
- Compliance
- 12×10-6cm/dyn (100Hz)
- Vertical tracking angle
- 20°
- Tracking force range
- 1.8g – 2.2g
- Recommended tracking force
- 2.0g